Intra-anesthetic Problems - Fire and Electrical Hazards in the Operating Room

Intra-anesthetic Problems - Fire and Electrical Hazards in the Operating Room is a topic covered in the Clinical Anesthesia Procedures.

To view the entire topic, please or .

Anesthesia Central is an all-in-one web and mobile solution for treating patients before, during, and after surgery. This collection of drugs, procedures, and test information is derived from Davis’s Drug, MGH Clinical Anesthesia Procedures, Pocket Guide to Diagnostic Tests, and PRIME Journals. Explore these free sample topics:

-- The first section of this topic is shown below --

Fire

Fire in the operating room is a rare event that requires the presence of an ignition source, fuel, and an oxidizing agent.

  1. Lasers and electrocautery devices are the most common ignition sources.
  2. Fuels include alcohol, solvents, sheets, drapes, and plastic or rubber materials (including endotracheal tubes). Modern potent inhalation anesthetics are not fuels. During an electrical fire, it is important to unplug the electrical source.
  3. Oxygen is by far the most common oxidizing agent, although nitrous oxide also supports combustion. Materials that are only marginally combustible in air can produce a massive flame in the presence of a high oxygen concentration. Supplemental oxygen can accumulate under surgical drapes and should be administered only when medically indicated.
  4. Fire extinguishers should be readily available in all anesthetizing locations. Carbon dioxide and halon fire extinguishers offer the advantage of efficacy against a variety of fires without producing the particulate contamination associated with dry chemical extinguishers.

-- To view the remaining sections of this topic, please or --

Fire

Fire in the operating room is a rare event that requires the presence of an ignition source, fuel, and an oxidizing agent.

  1. Lasers and electrocautery devices are the most common ignition sources.
  2. Fuels include alcohol, solvents, sheets, drapes, and plastic or rubber materials (including endotracheal tubes). Modern potent inhalation anesthetics are not fuels. During an electrical fire, it is important to unplug the electrical source.
  3. Oxygen is by far the most common oxidizing agent, although nitrous oxide also supports combustion. Materials that are only marginally combustible in air can produce a massive flame in the presence of a high oxygen concentration. Supplemental oxygen can accumulate under surgical drapes and should be administered only when medically indicated.
  4. Fire extinguishers should be readily available in all anesthetizing locations. Carbon dioxide and halon fire extinguishers offer the advantage of efficacy against a variety of fires without producing the particulate contamination associated with dry chemical extinguishers.

There's more to see -- the rest of this topic is available only to subscribers.